# The effect of altitude on the speed of sound

Jay Carr
• The effect of altitude on the speed of sound Jay Carr

I read once that the speed of sound decreases as altitude increases. I wonder if that's true and, if so, are the pressure waves made at high altitude lesser than the ones at low altitude because of the difference in air pressure? And, lastly, does that mean that lower speeds at higher altitudes will be subject to the problems one encounters when approaching mach speed?

• I read once that Mach speed decreases as altitude increases.

The speed of sound is solely dependant on temperature.

$$M = \sqrt{\gamma RT}$$

where $\gamma$ is the ratio of specific heats, $R$ is the molar gas constant and $T$ is the temprature in Kelvin. For Earth's athmosphere at 15° Celsius,

$$M=\sqrt{1.4\times 287\times 288.15}=340\,\text{m}/\text{s}$$

Does temprature decrease with altitude? Well, not always as can be seen by the international standard atmosphere:

....are the pressure waves made at high altitude lesser than the ones at low altitude because of the difference in air pressure?

There is no simple answer to this. Here's NASA's opinion:

Altitude determines the distance shock waves travel before reaching the ground, and this has the most significant effect on intensity. As the shock cone gets wider, and it moves outward and downward, its strength is reduced. Generally, the higher the aircraft, the greater the distance the shock wave must travel, reducing the intensity of the sonic boom. Of all the factors influencing sonic booms, increasing altitude is the most effective method of reducing sonic boom intensity.

Tags
• I read once that the speed of sound decreases as altitude increases. I wonder if that's true and, if so, are the pressure waves made at high altitude lesser than the ones at low altitude because of the difference in air pressure? And, lastly, does that mean that lower speeds at higher altitudes will be subject to the problems one encounters when approaching mach speed?

• Are airspace violations (e.g. entry to class B without clearance) based on primary radar and/or Mode C transponder, or something else? I read that Mode C altitude is based on pressure altitude, i.e., set to 29.92" ... but presumably that's adjusted at the ATC facility based on the current pressure before being used for altitude enforcement. This begs the question, what would stop one (hypothetically), just winding back the altimeter pressure reading to appear to be at a lower altitude? So to summarize: How are airspace violations detected: What data input is used? If Mode C reading

• When aircraft is at high altitude, atmospheric pressure will be too low but inside aircraft pressure is maintained such that it is comfortable for crew and passengers. But how is it maintained? As I understand that at higher altitude pressure difference can be too large which can deform the plane than how this is handled.

• By my understanding, the Mach Number at a given altitude is calculated by dividing IAS by the speed of sound at that altitude. So how is this speed of sound calculated to display the Mach Number on the Mach Meter? Does the Mach Meter share the same pitot tube used to calculate airspeed?

• Below the transition altitude (18,000 feet in the US), pilots use local pressure readings to calibrate their altimeters. Above the transition altitude, pilots set a standard pressure to calibrate the altimeter. The standard pressure is 29.92 inches of mercury or 1013 hPa. Where did this value come from?

• case, and average case for each location, altitude, and date in the future. I have searched and searched Google to no avail. Where can this wind data be found, and how can it be used... navigation, or any other type of actual flight operations.  PROGRAM FEATURES  A seasonal and monthly database with global coverage from 1000 millibars (364 feet pressure altitude) to 10 millibars (101,885 feet pressure altitude). Annual data updates to the most recent 30 year period. Airport codes and coordinates may be imported from a text file in a comma separated value (CSV

• I've read a lot of NTSB crash reports regarding small, GA aircraft (just trying to figure out what went wrong and what to avoid.) There seem to be a lot of reports that talk about "low altitude high speed stalls" happening on approach. What is a high speed stall, and how is it created? What is the best way to avoid one? As they seem to cause a lot of GA accidents...

• This is confusing to me: Since pressure increases with temperature (I don't know why), how can air density decrease with temperature. In a hot day then pressure would increase and air density decrease? How is that possible? @casey @steve V. @StallSpin The point is this: FAA writtten says: The altimeter will indicate lower altitude than actually flown in a temp warmer than standard. I...) and in a couple of minutes we have: Indicated Altitude: 12.000ft True Altitude: 14.000ft (In warmer than stantard, pressure increases so the aneroid waffers in the altimeter will contract

• in Europe you pretty much need to know QNH, QFE, QDM and QTE) and only later found out it means "pressure altitude". Q-codes suck. Anyway I said "Say again" and he came back and asked how many were...I recently had the opportunity to fly a PAR approach into Büchel Airbase in Germany. It was a ton of fun and I'll definitely try it again when I get the chance. However, as we were getting set up for the approach I received the following call (callsign) request heading It caught me off guard, and it took a while but I eventually interpreted it as "say heading" and gave him my current

• When flying in an Airbus, I often (if not always) hear a weird sound before the aircraft starts to accelerate for taking off. From where exactly does this sound come from? Why doesn't it appear on other aircraft?

Data information